Custom sapphire windows are widely used to protect cameras, sensors, laser systems, optical instruments and viewing ports operating in demanding environments. However, requesting a quotation for a sapphire window involves more than simply providing its diameter and thickness.
Crystal orientation, dimensional tolerance, flatness, parallelism, surface quality, clear aperture, edge geometry and optical coating can all affect manufacturability, optical performance, inspection requirements, lead time and cost.
For buyers, engineers and sourcing teams, a complete RFQ helps a sapphire window manufacturer understand the actual application and provide a more accurate quotation without repeated technical clarification.
This guide explains the key specifications that should be included when requesting a custom sapphire window quote.
1. Start with the Sapphire Window Shape
The first step is to define the basic geometry.
Custom sapphire windows may be manufactured in many configurations, including:
- ラウンド・サファイア・ウィンドウ
- Square sapphire windows
- Rectangular sapphire windows
- Ring-shaped sapphire windows
- Sapphire windows with center holes
- Sapphire windows with multiple holes
- Stepped sapphire windows
- Sapphire windows with slots
- Sapphire windows with chamfers
- Custom irregular sapphire components
For a simple circular window, provide the diameter and thickness.
For rectangular parts, specify:
Length × Width × Thickness
For complex geometries, a 2D drawing in PDF format and preferably a 3D CAD file should be included with the RFQ.
Do not rely only on a photograph when dimensional accuracy is important. A technical drawing significantly reduces the possibility of misunderstanding during quotation and manufacturing.
2. Specify Dimensions and Dimensional Tolerances
A useful sapphire window RFQ should include both the nominal dimensions and the allowable tolerances.
例えば、こうだ：
| パラメータ | Example Requirement |
|---|---|
| 直径 | Ø50.00 mm |
| 直径の公差 | ±0.05 mm |
| 厚さ | 2.00 mm |
| 厚さの公差 | ±0.05 mm |
| エッジの面取り | 0.2 × 45° |
| 数量 | 50 pcs |
The tolerances above are only an RFQ example and should not automatically be applied to every sapphire window.
The required tolerance depends on how the window will be mounted and how critical the mechanical interface is.
A sapphire protective cover bonded into a housing may have very different dimensional requirements from a precision optical window installed in a tightly controlled mechanical mount.
不必要に厳しい公差は避ける
A common RFQ mistake is specifying the tightest possible tolerance for every dimension.
公差を厳しくすることで、以下の点が向上する可能性があります：
- 加工の難易度
- 検査要件
- Manufacturing time
- Production cost
- Risk of rejection
Instead, distinguish between critical dimensions そして non-critical dimensions.
If only the outer diameter controls the fit with a metal housing, for example, that dimension may require a tighter tolerance while other features can remain more flexible.
3. Define the Sapphire Crystal Orientation
Synthetic sapphire is single-crystal aluminum oxide, and crystallographic orientation can matter in optical and mechanical applications.
一般的な方向性としては、次のようなものがあります：
- C面サファイア
- A面サファイア
- M面サファイア
- R面サファイア
- Random orientation, when orientation is not critical
For many optical window applications, C面サファイア is commonly specified because the c-axis is perpendicular to the window surface and this configuration can be advantageous where birefringence effects must be controlled.
However, not every protective sapphire window requires a specific crystal orientation.
If orientation does not affect your optical, mechanical or assembly requirements, indicate this clearly in the RFQ. Allowing the manufacturer more flexibility may simplify material selection and reduce unnecessary cost.
A clear specification might read:
Material: Optical-grade synthetic sapphire
Orientation: C-plane, c-axis perpendicular to polished surface
or simply:
Orientation: Not critical
when appropriate.
4. Specify Flatness
平坦度とは、光学面が理想的な平面からどれだけ逸脱しているかを表す指標である。.
It is particularly important when the sapphire window is located in an imaging or laser optical path.
Common optical drawings may specify flatness using fractions of a wavelength, such as:
- 1 λ
- λ/2
- λ/4
- λ/10
The measurement wavelength should also be stated, because a specification such as λ/4 is incomplete without defining the reference wavelength.
A typical drawing notation might therefore look like:
Surface Flatness: λ/4 @ 632.8 nm over clear aperture
Higher precision is not automatically better for every project. Precision sapphire optics can be produced with demanding flatness specifications, but achievable performance depends strongly on diameter, thickness, aspect ratio, polishing method and other geometric factors. Commercial sapphire optics are offered across substantially different flatness grades depending on the intended application.
For a protective window in front of an industrial camera, for example, extremely tight flatness may not be necessary.
For a laser or high-resolution imaging system, it may be much more important.
5. Do Not Confuse Flatness with Parallelism
Flatness and parallelism describe different characteristics.
平坦性 concerns the shape of an individual optical surface.
パラレリズム concerns the angular relationship between the two opposite surfaces.
並列処理は、以下の方法で指定できます：
- 角分
- 秒角
For applications where beam deviation or wedge must be tightly controlled, parallelism can become an important specification.
Commercial optical-grade sapphire windows demonstrate that parallelism requirements can range from relatively relaxed values to only a few arc-seconds for high-precision products.
If the application is sensitive to beam deviation, the RFQ should clearly state the required parallelism or wedge tolerance.
6. Define Surface Quality
Surface quality is another critical specification for optical sapphire windows.
In many optical drawings, it is expressed using a scratch-dig designation such as:
- 80-50
- 60-40
- 40-20
- 20-10
- 10-5
Lower numbers generally indicate a more demanding cosmetic surface requirement.
For example, a protective sapphire cover for an industrial sensor may not require the same surface quality as a sapphire window used in a precision laser system.
High-precision commercial sapphire windows can be specified at levels such as 20-10 or 10-5, while less demanding applications may use more economical specifications.
When sending an RFQ, specify both surfaces separately if their requirements differ.
例えば、こうだ：
Surface A: 20-10 scratch-dig
Surface B: 40-20 scratch-dig
This can be useful when only one side faces the critical optical path.
7. Specify Surface Roughness When Necessary
Surface roughness and scratch-dig are not the same specification.
Scratch-dig primarily addresses visible surface imperfections under a defined inspection system, while surface roughness describes microscopic texture.
For precision optical, laser, bonding or coating applications, surface roughness may need to be specified separately.
It may be expressed as:
Ra ≤ X nm
Do not automatically request extremely low surface roughness unless the application requires it.
For many conventional protective windows, scratch-dig and optical performance specifications may be more relevant than an ultra-low Ra requirement.
For specialized laser, high-power, bonding or optical coating applications, however, roughness can become considerably more important.
8. Define the Clear Aperture
The 有効口径 is the usable optical area of the window over which specified optical characteristics must be maintained.
This specification is easy to overlook.
A customer may order a 50 mm diameter window but only require optical performance over the central 45 mm.
The outer region may be used for mounting, bonding or mechanical retention.
A typical specification might be:
Clear Aperture: ≥90% of diameter
または：
Clear Aperture: Ø46 mm minimum
Precision sapphire windows are commonly supplied with defined clear apertures rather than requiring the full physical diameter to satisfy every optical specification.
Defining the actual usable optical area can prevent unnecessary manufacturing difficulty.
9. Describe the Edge Requirements
Sapphire is extremely hard, but edge design remains important for handling, assembly and mechanical reliability.
The RFQ should state whether the window requires:
- Sharp edge
- エッジの破損
- 面取り
- Bevel
- Radius
- Ground edge
- 面取り加工された縁
- Stepped edge
例えば、こうだ：
Edge: 0.2 mm × 45° chamfer, both sides
For components that will be bonded or installed into a housing, include the mating dimensions and indicate which surfaces or edges are critical.
Custom sapphire components can also incorporate holes, slots, steps and specialized mounting profiles when the application requires them.
10. Specify Holes, Slots and Other Machined Features
Modern sapphire windows are not always simple flat discs.
Some projects require:
- 中央の穴
- Off-center holes
- 複数の穴
- スロット
- 座ぐり
- Steps
- ノッチ
- Internal openings
- Special edge profiles
When these features are present, provide:
- 穴径
- Position
- 位置公差
- Hole-to-edge distance
- Through or blind feature
- Chamfer requirement
- Edge chipping requirement
- Surface finish requirements
A drawing is strongly recommended.
The relationship between hole diameter, material thickness and distance from the edge can significantly affect manufacturability.
If the geometry is still under development, asking the manufacturer for a DFM review before finalizing the drawing can help avoid unnecessarily difficult features.
11. Define the Required Wavelength Range
The required optical wavelength is especially important when an optical coating will be applied.
Instead of simply writing:
AR coated
provide the actual operating wavelength or wavelength band.
例えば、こうだ：
Operating wavelength: 400–700 nm
または：
Laser wavelength: 1064 nm
または：
Operating band: 1530–1570 nm
The coating should be designed around the optical system rather than selected independently from it.
Other useful information may include:
- 入射角
- Required average transmission
- 最大反射率
- Polarization requirement
- 動作環境
12. Specify the Sapphire Window Coating
A sapphire window may be supplied uncoated or with a functional optical coating.
Common requirements can include:
- Anti-reflection coating
- Broadband AR coating
- Narrowband AR coating
- Dual-band coating
- Protective coating
- Conductive coating, for specialized applications
When requesting an AR-coated sapphire window, provide at least:
波長範囲
入射角
Transmission or reflectance target
Coated surface
動作環境
例えば、こうだ：
AR coating both sides
Wavelength: 1064 nm
AOI: 0°
Ravg: ≤0.5% per surface
The numbers above are an example RFQ format rather than a universal coating specification.
Actual achievable coating performance should be confirmed for the wavelength range, geometry, coating design and production requirements of the project.
13. Include Environmental Requirements
One major reason designers select sapphire is its combination of optical performance and mechanical durability.
Sapphire is used for windows exposed to demanding conditions because of its hardness, chemical resistance and ability to operate across challenging environments.
If your sapphire window will experience unusual conditions, tell the manufacturer during the RFQ stage.
Relevant information may include:
- High temperature
- Low temperature
- Rapid thermal cycling
- High external pressure
- Vacuum
- 研磨粒子
- 塩水噴霧
- 化学物質への曝露
- Outdoor weathering
- Laser exposure
- High humidity
These conditions may influence thickness, edge geometry, coating selection, inspection and mounting recommendations.
For pressure windows especially, do not select thickness from optical requirements alone. Pressure, unsupported aperture, mounting method, safety factor and operating environment should all be evaluated.
14. State Inspection and Documentation Requirements
Buyers should define required inspection documents before production instead of requesting additional documentation after the parts have already been manufactured.
Possible requirements include:
- 寸法検査報告書
- 表面品質検査
- 平坦度測定
- Parallelism measurement
- Surface roughness report
- Coating transmission curve
- 材料証明書
- Crystal orientation verification
- 適合証明書
- Batch traceability
- Custom inspection report
Not every order requires every document.
For prototype or general industrial applications, a basic inspection report may be sufficient.
For aerospace, semiconductor, laser or other controlled applications, more comprehensive traceability may be required.
15. Provide Quantity and Forecast Demand
Always include the required quantity.
例えば、こうだ：
Prototype: 5 pcs
Initial order: 50 pcs
Estimated annual demand: 1,000 pcs
This is much more useful than simply requesting:
“Please quote your best price.”
Quantity affects:
- Raw material planning
- Tooling strategy
- Production setup
- 検査方法
- パッケージング
- Cost per piece
If the project could move from prototypes to mass production, tell the supplier at the beginning.
The manufacturer may recommend different production approaches depending on the expected volume.
Custom Sapphire Window RFQ Example
A well-prepared RFQ might look like this:
Product: カスタム・サファイア・オプティカル・ウィンドウ
Material: Optical-grade synthetic sapphire
Shape: ラウンド
Orientation: C面
直径： Ø50.00 ±0.05 mm
厚さ： 2.00 ±0.05 mm
平坦度： λ/4 @ 632.8 nm over clear aperture
Parallelism: ≤30 arc sec
Surface Quality: 20-10 scratch-dig
Clear Aperture: ≥90%
Edge: 0.2 × 45° chamfer
Coating: AR coating on both sides
Operating Wavelength: 1064 nm
AOI: 0°
Quantity: 20 pcs prototype, estimated 500 pcs/year
Documentation: Dimensional inspection report and coating curve
用途： Optical sensor protection
Attach a PDF drawing or CAD file whenever possible.
With this information, a sapphire window manufacturer can evaluate the project far more efficiently than with dimensions alone.
Sapphire Window RFQ Checklist
Before sending your inquiry, check whether you have provided:
- Material / sapphire grade
- 形状
- Diameter or length and width
- 厚さ
- 寸法公差
- 結晶方位
- 平坦性
- 並列性またはウェッジ
- 表面品質
- Surface roughness, if required
- 有効口径
- Edge or chamfer specification
- Hole / slot / step dimensions
- 光の波長
- AR coating requirement
- 入射角
- Environmental conditions
- 検査要件
- 数量
- Annual forecast
- Drawing or CAD file
Not every project needs all of these specifications. The objective is to define the parameters that genuinely affect your application.
What If You Do Not Know All the Specifications?
It is common for buyers to know the application but not every optical specification.
In that situation, do not guess.
Instead, provide the information you already know, including:
Application + dimensions + operating wavelength + environment + quantity
and ask the manufacturer to review the design.
例えば、こうだ：
We need a sapphire protection window for a 1064 nm optical sensor. The approximate diameter is 40 mm and the available thickness is 2–3 mm. The window will be installed outdoors. Please recommend suitable orientation, surface quality, flatness and AR coating specifications.
This gives the engineering team enough context to discuss a practical manufacturing solution.
よくあるご質問
What information is required to quote a custom sapphire window?
At minimum, provide the shape, dimensions, thickness, quantity and application. For precision optical windows, also specify crystal orientation, dimensional tolerances, flatness, parallelism, surface quality, clear aperture, wavelength and coating requirements.
Is C-plane required for every sapphire optical window?
No. C-plane is commonly used in optical window applications, particularly where crystal orientation and birefringence are relevant, but some protective or mechanical applications may not require a specified orientation. The correct choice depends on the optical system and application.
What scratch-dig should I specify for a sapphire window?
There is no single correct value for every application. General protective windows may tolerate a less demanding surface specification, while precision imaging and laser optics may require 20-10, 10-5 or another controlled surface quality. Avoid specifying a tighter grade than the system actually needs.
Does tighter flatness increase sapphire window cost?
Generally, tighter optical tolerances require more controlled polishing and inspection. The cost impact also depends on window diameter, thickness, aspect ratio and quantity. Use the optical requirement required by the system rather than automatically requesting the tightest available specification.
Can sapphire windows have holes or special shapes?
Yes. Custom sapphire components can be manufactured with holes, slots, steps, chamfers, rings and other special geometries. Complex designs should be submitted with a detailed engineering drawing for manufacturability review.
Can sapphire windows be supplied with AR coating?
Yes. Anti-reflection coatings can be designed for specific wavelengths or wavelength ranges. Provide the operating wavelength, angle of incidence and required optical performance when requesting a quotation.
Request a Custom Sapphire Window Quote
A complete RFQ helps shorten technical communication and allows the manufacturer to evaluate material selection, machining, polishing, coating and inspection requirements before production.
If you are developing a custom sapphire optical window, send us your drawing, dimensions, crystal orientation, optical specifications, coating requirements and required quantity.
If some specifications have not yet been finalized, provide the application, operating wavelength and environmental conditions. Our team can review the available information and discuss suitable manufacturing options for prototypes, small batches and production quantities.